[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
CORRELATION TECHNOLOGY

Fault Diagnosis of Digital Circuit-board Based on LASAR's Simulation

  • LIU Tao ,
  • JIANG Wenzhi ,
  • ZHANG Liping
Expand
  • Naval Aeronautical and Astronautical University, Shandong Yantai 264001, China

Received date: 2009-06-04

  Online published: 2025-05-28

Abstract

The test program is very important during fault diagnosis and orientation of circuit board. The software LASAR is a simulation system used to accomplish the digital circuit test and logical analysis. How to diagnose fault of a digital-board circuit using the LASAR software which includes process, analysis, development of procedure of stimulation and LASAR's simulation was introduced. How to use this system in actual application by simulating a circuit was explained.

Cite this article

LIU Tao , JIANG Wenzhi , ZHANG Liping . Fault Diagnosis of Digital Circuit-board Based on LASAR's Simulation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010 , 30(2) : 256 -258 . DOI: 10.15892/j.cnki.djzdxb.2010.02.049

[an error occurred while processing this directive]

References

[1]
蒋驰. LASAR 在现代仪器自动测试与故障诊断中的应用[J]. 现代仪器, 2008, (3): 54-55.
[2]
朱小平, 肖明清. 基于LASAR的印制电路板故障诊断系统研究[J]. 计算机自动测量与控制, 2001, 9 (2): 20-21.
[3]
张波, 陈岩申, 王桂楚. 海军某型声纳电路板测试程序集(TPS)开发研究[J]. 仪器仪表学报, 2002, 23 (21): 251-253.
[4]
Teradyne Inc. LASAR V6 for test generation training manual and labs[Z]. 2000.
[5]
陈岩申, 张波. LASAR 仿真软件在海军某型 ATE 上的后处理研究[J]. 计算机测量与控制, 2003, 11 (11): 878-880.
Outlines

/

[an error occurred while processing this directive]