[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Folding Design of the Sub-reflector Assembly

  • WANG Hong 1, 2 ,
  • ZHAO Qi 3 ,
  • TIAN Yapeng 1, 2
Expand
  • 1 The 39th Research Institute of China Electronics Technology Group Corporation, Xi'an 710065,Shaanxi,China
  • 2 Shaanxi Key Laboratory of Antenna and Control Technology, Xi'an 710065,Shaanxi,China
  • 3 Xi'an Modern Control Technology Research Institute, Xi'an 710065,Shaanxi,China

Received date: 2022-05-11

  Online published: 2025-02-07

Abstract

Due to the pose adjustment of the antenna sub-reflector, the overall adjustment of the antenna sub-reflector and feed, these two methods cannot solve the height limit problem of vehicle antenna transportation, so the article through the analysis of the vehicle antenna sub-reflector assembly, combined with Proe 3D software, the scheme of folding down the antenna sub-reflector assembly is proposed, after the measured, the result index is good, which shows that this scheme is feasible to adjust the antenna sub-reflector.

Cite this article

WANG Hong , ZHAO Qi , TIAN Yapeng . Folding Design of the Sub-reflector Assembly[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2023 , 43(3) : 106 -109 . DOI: 10.15892/j.cnki.djzdxb.2023.03.016

[an error occurred while processing this directive]
[1]
齐颖, 谭宗啸. 双偏心轮副面调整机构设计分析[J]. 空间电子技术, 2005(3): 51-54.

QI Y, TAN Z X. Design analysis of sub-reflecting surface adjusting of double eccentric wheel[J]. Space Electronics Technology, 2005(3): 51-54.

[2]
窦玉超, 姚建涛, 侯雨雷, 等. 65 m射电望远镜副面调整机构容错策略与工作空间边界识别[J]. 中国机械工程, 2014, 25(1): 17-22.

DOU Y C, YAO J T, HOU Y L, et al. Fault tolerance strategy and workspace boundary identification of adjusting mechanism for 65 meters radio telescope[J]. China Mechanical Engineering, 2014, 25(1): 17-22.

[3]
侯雨雷, 段艳宾, 窦玉超, 等. 65 m射电望远镜天线副面调整机构标定研究[J]. 中国机械工程, 2013, 24(24): 3318-3328.

HOU Y L, DUAN Y B, DOU Y C, et al. Calibration of adjusting mechanism for subreflector of a 65 meters radio telescope[J]. China Mechanical Engineering, 2013, 24(24): 3318-3328.

[4]
李建军, 段艳宾, 曾达幸, 等. 65 m射电望远镜天线并联式副面调整机构动力学仿真研究[J]. 系统仿真学报, 2014, 26(5): 1040-1070.

LI J J, DUAN Y B, ZENG D X, et al. Study on dynamics simulation of parallel adjusting mechanism for sub-reflector of 65 m antenna[J]. Journal of System Simulation, 2014, 26(5): 1040-1070.

[5]
段艳宾, 姚建涛, 赵永生. 65 m射电望远镜副面调整机构系统精度分析[J]. 机械设计与制造, 2013(11): 151-153.

DUAN Y B, YAO J T, ZHAO Y S. Configuration design of the adjusting parallel mechanism for sub-reflector of antenna of radio telescope antenna[J]. Machinery Design & Manufacture, 2013(11): 151-153.

[6]
姚建涛, 曾达幸, 侯雨雷, 等. 大型射电望远镜天线副反射面调整系统设计与实验研究[J]. 载人航天, 2016, 22(1): 69-87.

YAO J T, ZENG D X, HOU Y L, et al. Design and experiment research of subreflector adjusting system in large radio telescope antenna[J]. Manned Spaceflight, 2016, 22(1): 69-87.

[7]
项斌斌, 王从思, 王伟, 等. 基于机电耦合的反射面天线副面位置调整方法[J]. 系统工程与电子技术, 2018, 40(3): 489-497.

XIANG B B, WANG C S, WANG W, et al, Adjustment method of reflective antenna based on electromechanical couple theory[J]. Systems Engineering and Electronics Technology, 2018, 40(3): 489-497.

[8]
白海龙, 马万垒, 赵航. 改进型机载Ka频段天线副面调整装置[J]. 河北省科学院学报, 2018, 35(2): 70-73.

BAI H L, MA W L, ZHAO H. Modified airborne Ka-band antenna subreflector adjustment device[J]. Journal of the Hebei Academy of Sciences, 2018, 35(2): 70-73.

[9]
刘少智, 李晟诚, 闫颂. 一种可快速调节的天线副反射面装置: 201911018165.0[P]. 2019-10-24.

LIU S Z, LI S C, YAN S. A fast-adjustable antenna sub-reflector surface device: 201911018165.0[P]. 2019-10-24.

[10]
冯洁. 基于混合密度网络的天线副面调整机构方法研究[D]. 西安: 西安电子科技大学, 2014.

FENG J. A study of mixture density network in adjusting sub-reflector surface antennas[D]. Xi'an: Xidian University, 2014.

[11]
金雷. 高精度天线副面调整技术研究[D]. 西安: 西安电子科技大学, 2015.

JIN L. Adjustment technology of the high-precision antenna sub-reflector[D]. Xi'an: Xidian University, 2015.

[12]
周倩. 多波束天线副面调整升降机构的设计[J]. 测控与通讯, 2018, 42(3): 41-44.

ZHOU Q. Design of sub-reflecting surface adjusting and lifting Mechanism for multi-beam antenna[J]. Measurement & Control and Communication, 2018, 42(3): 41-44.

Outlines

/

[an error occurred while processing this directive]