[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2010 , Vol. 30 >Issue 3: 63 - 65

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2010.03.016

PROJECTILES TECHNOLOGY

Experiment on Ballistic Property of the Different Steel Chip-off Plate and Ceramic Composite

  • HU Liping ,
  • ZHONG Tao ,
  • WANG Zhihui ,
  • HOU Shengying ,
  • GUO Ling
Expand
  • Ningbo Branch, Ordnance Science and Research Academy of China, Shandong Yantai 264003, China

Received date: 2009-06-28

  Online published: 2025-05-28

Fold

Abstract

With the 12.7mm armor piercing (AP) ammunition, experiments had been done for the ceramic/steel armors when thickness of chip-off plates of ceramic are different, in order to investigate the influence of thickness of chip-off plates of ceramic on the ballistic properties of such armors. Bearer plates were made of ceramic, high strength steel was used for chip-off plates, and aluminum alloy was made for base plates. It was found that ballistic properties increased with chip-off plates when thickness of bearer plates is 10mm. When bearer plates are 8mm thick, ballistic properties of such armors haven't large change when chip-off plates are different thick. Bearer plates and chip-off plates are bonded closely that can improve the ballistic properties of ceramic bearer plates.

Key words： thickness of chip-off plates; ceramic/steel; composite armor; ballistic property

Cite this article

HU Liping , ZHONG Tao , WANG Zhihui , HOU Shengying , GUO Ling . Experiment on Ballistic Property of the Different Steel Chip-off Plate and Ceramic Composite[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010 , 30(3) : 63 -65 . DOI: 10.15892/j.cnki.djzdxb.2010.03.016

[an error occurred while processing this directive]

References

[1]
晏麓晖, 曾首义, 蒋志刚,等. 陶瓷厚度与约束对陶瓷复合靶抗弹性能的影响[J]. 弹道学报, 2009, 21 (3): 15- 18.
[2]
张自强, 赵宝荣, 张锐生,等. 装甲防护技术基础[M]. 北京: 兵器工业出版社, 2000.
[3]
王天运, 李爽, 刘水江,等. Al2O3陶瓷/CFRP 复合防护板抗弹性能研究[J]. 防护工程, 2008, 30 (2): 55- 58.
[4]
张明, 何煌, 曾首义. 穿甲子弹侵彻陶瓷复合装甲的有限元分析[J]. 先进制造技术, 2006, 25 (7): 37- 39.
[5]
姜春兰, 陈放, 李明,等. 钨球对陶瓷/复合靶的侵彻与贯穿[J]. 兵工学报, 2001, 22 (1): 37- 40.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]