[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2018 , Vol. 38 >Issue 2: 7 - 10,15

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2018.02.002

Study on the Influence of Gas Jet Load and Wind Load on Adapter Separation

  • YIN Xin ,
  • SONG Shuangjing ,
  • YU Qirui ,
  • WANG Xinxing ,
  • ZHAO Xin ,
  • LI Jun
Expand
  • 1 School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
    2 Hubei Jiangshan Heavy Industries Co. Ltd, Hubei Xiangyang 441000, China
    3 Navigation and Control Technology Research Institute of China Ordnance Industries, Beijing 100089, China

Received date: 2017-04-25

  Online published: 2025-05-28

Fold

Abstract

Using adapter to make rocket artillery simultaneously deorbit when it is launched is a new technology. In order to analyze the landing range of the adapter and whether the second time collision between adapter and rocket would occur in the process of separation, according to the law of real gas jet velocity attenuation, this paper presents a simplified method for gas jet loading, the effects of each load under the conditions of different attenuation laws, different wind speeds and wind directions which influenced the movement of the adapter were considered, then we used ADAMS to analyze. The analysis results show that the adapter can be safely and reliably separated from the rocket, and the second time collision will not occur, but the adapter falls on the artillery truck under the zero launching angles, there are some security risks.

Key words： rocket artillery; adapter; simultaneous deorbit; gas jet; wind load

Cite this article

YIN Xin , SONG Shuangjing , YU Qirui , WANG Xinxing , ZHAO Xin , LI Jun . Study on the Influence of Gas Jet Load and Wind Load on Adapter Separation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2018 , 38(2) : 7 -10,15 . DOI: 10.15892/j.cnki.djzdxb.2018.02.002

[an error occurred while processing this directive]

References

[1]
赵华, 王敏杰, 杨为,等. 箱式发射导弹适配器[J]. 战术导弹技术, 2007. 27(4): 42-50.
[2]
RUDD G E, MILER J F, SIMON J T. Shock Absorbing Missile Launch Pads: US 4734329 P. 1988-08-16.
[3]
秦丽, 陈国光. 有弹性适配器的火箭弹发射动力学研究[J]. 弹箭与制导学报, 1997, 17(2): 12-18.
[4]
董贵. 适配器强度有限元分析[J]. 战术导弹技术, 1995, 15(2): 61-64.
[5]
施俊凯. 垂直发射适配器分离过程虚拟实验研究[D]. 哈尔滨: 哈尔滨工业大学, 2014.
[6]
高强, 白静, 张平,等. 分离力作用点位置和风速大小对适配器分离影响研究[J]. 导弹与航天运载技术, 2013, 35(3): 23-26.
[7]
黄聪. 适配器结构外形和外界风载荷对适配器分离落点分布的影响[D]. 北京: 北京理工大学, 2016.
[8]
陈立平, 张云清, 任卫群,等. 机械系统动力学分析及ADAMS 应用教程[M]. 北京: 清华大学出版社, 2005: 33-50.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]