[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2018 , Vol. 38 >Issue 2: 84 - 87

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2018.02.019

The Study on the Process Improvement of the Interlaminar Shear Force Between the Revolving Layer and the Winding Layer

  • CHEN Meng ,
  • YANG Yuedong ,
  • LIU Lin ,
  • ZHAO Xiaogang ,
  • YANG Shuwen ,
  • ZHAO Haie ,
  • ZHOU Qunkai ,
  • HUANG Shengbo ,
  • LI Yonghui
Expand
  • Xi'an Modern Control Technology Research Institute, Xi'an 710065, China

Received date: 2017-07-12

  Online published: 2025-05-28

Fold

Abstract

In order to improve the smoothness of the internal wall of the XX missile launcher and the interlaminar shear strength (ILSS) between the revolving layer and the winding layer, a process equipment was designed in this paper. The smoothness of the inner wall has been greatly improved by means of the tool. Two methods of testing standard is applied to test ILSS of the revolving layer and winding layer at the same time, the ILSS has been increased by 113.4% and 64.0% respectively when compared to results not using the tool. It has been shown that the process equipment has been successfully used in improving the procedure of spreading the revolving layer, which results to reducing the interface defects, and improving the interface bonding strength.

Key words： revolving layer; winding layer; interlaminar shear strength

Cite this article

CHEN Meng , YANG Yuedong , LIU Lin , ZHAO Xiaogang , YANG Shuwen , ZHAO Haie , ZHOU Qunkai , HUANG Shengbo , LI Yonghui . The Study on the Process Improvement of the Interlaminar Shear Force Between the Revolving Layer and the Winding Layer[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2018 , 38(2) : 84 -87 . DOI: 10.15892/j.cnki.djzdxb.2018.02.019

[an error occurred while processing this directive]

References

[1]
李金龙, 虞健美, 刘冬梅. 碳纤维在导弹发射器上的应用研究[J]. 弹箭与制导学报, 2012. 321: 9-42.
[2]
张斯纬, 徐艳, 陈连会. 一种轻质高强碳纤维缠绕发射筒:CN 202836354 U[P]. 2012-10-26.
[3]
何江军. 复合材料技术在轻质导弹发射筒中的应用. 科学与财富, 2017 18: 45.
[4]
孙海潮. 车载“红箭”8反坦克导弹发射筒]. 兵器知识, 2016 3: 7.
[5]
熊文博. “红箭”来袭珠海航展上的“红箭”10反坦克导弹. 坦克装甲车辆, 2016 12: 31-35.
[6]
王瑛琪, 盖登宇, 宋以国. 纤维缠绕技术的现状及发展趋势. 材料导报, 2011, 255: 110-413.
[7]
陈秋飞, 戴慧平, 郭鹏宗,等. 表面处理工艺对碳纤维复合材料的ILSS及界面形貌的影响. 玻璃钢/复合材料, 2016 3: 60-64.
[8]
徐光磊. 含内衬纤维复合材料发射筒力学性能研究[D]. 南京: 南京理工大学, 2013.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]