Burning Surface Shift Automation by UG Secondary Development

TIAN  Xiaotao; LIU  Shujie; MENG  Xiuqin; CAI  Kegang

doi:10.15892/j.cnki.djzdxb.2012.04.018

Journal of Projectiles, Rockets, Missiles and Guidance >

2012 , Vol. 32 >Issue 4: 152 - 154

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2012.04.018

ROCKETS TECHNOLOGY

Burning Surface Shift Automation by UG Secondary Development

TIAN Xiaotao ,
LIU Shujie ,
MENG Xiuqin ,
CAI Kegang

Expand

No. 203 Research Institute of China Ordnance Industries, Xi'an 710065, China

Received date: 2011-12-27

Online published: 2025-05-29

Fold

Abstract

In this paper, a new arithmetic of model's burning surface area was provided to fast and exactly get the areas-thickness curve. UG secondary development function was achieved through MFC and UGAPI, MFC produced dialog box, UGAPI function performed burning surface back-shift algorithm. At last, the arithmetic was applied in a solid rocket motor grain, through comparison between the method and traditional method, the new method was testified to be correct and effective.

Key words： UG/OPEN API; MFC; shift of burning surface; secondary development; arithmetic of burning surface area

Cite this article

TIAN Xiaotao , LIU Shujie , MENG Xiuqin , CAI Kegang . Burning Surface Shift Automation by UG Secondary Development[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2012 , 32(4) : 152 -154 . DOI: 10.15892/j.cnki.djzdxb.2012.04.018

[an error occurred while processing this directive]

References

[1]	蔡强, 鲍福廷. 基于ACIS几何造型平台的固体火箭发动机装药设计[J]. 固体火箭技术, 2008, 31 (3): 236- 242.
[2]	蔡强, 鲍福廷, 丁林. 翼柱形药柱的变量化设计方法研究[C]// 宇航学会,2010年第27届年会论文集, 2010: 90- 94.
[3]	刘书杰, 王厚庆, 孟秀琴,等. 一种基于 UG与 Matlab 的自动燃面退移方法[C]// 固体火箭发动机技术学术交流会, 2011.
[4]	应建勇. UG 二次开发中 MFC 调用方法的研究[J]. 机电产品研发与创新, 2005, 18 (6): 102- 108.
[5]	陈科, 张斌. 基于MFC 的UG二次开发方法的研究[J]. 中国重型装备, 2010 (3): 15- 18.
[6]	蒋玲玲, 王细详. 基于 VC_的 UG 二次开发技术 UG_OpenMenuScript 的应用[J]. 计算机与现代化, 2009 (10): 101- 103.
[7]	高成. Matlab 图像处理与应用[M]. 北京: 国防工业出版社, 2007.

Options

Outlines