[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2012 , Vol. 32 >Issue 5: 149 - 151

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2012.05.016

CORRELATION TECHNOLOGY

The Optimal Design for Anti-high Overload Capacity of Multi-range Micro-acclerometer

  • XU Xiangju ,
  • ZHU Jie ,
  • GUO Tao ,
  • LI Wenyan
Expand
  • National Key Laboratory for Electronic Measurement Technology, Key Laboratory of Instrumentation Science & DynamicMeasurement(North University of China), Ministy of Education, Taiyuan 030051, China

Received date: 2011-12-08

  Online published: 2025-05-29

Fold

Abstract

The sensor bears great impact in aerospace. The onboard sensor, which requires the sensor has a high resistance to high overload capacity. Based on the original design, the high and low range of the multirange micro-acclerometer was optimized. In the examination, it shows the optimized structure can resist 20000g, and can effectively meet high overload requirements of high-impact environment.

Key words： anti-high over-load; multi-range micro-accelerometer; ANSYS

Cite this article

XU Xiangju , ZHU Jie , GUO Tao , LI Wenyan . The Optimal Design for Anti-high Overload Capacity of Multi-range Micro-acclerometer[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2012 , 32(5) : 149 -151 . DOI: 10.15892/j.cnki.djzdxb.2012.05.016

[an error occurred while processing this directive]

References

[1]
王长虹 阵列式硅压力加速度传感器研究[D]. 哈尔滨: 哈尔滨工程大学, 2003.
[2]
夏烈芳, 郭涛, 向婷. 复合量程加速度计抗高过载技术的研究. 传感技术学报, 2010, 23 (3): 359- 362.
[3]
石云波, 祁晓瑾, 刘俊,等. 微型高过载加速度传感器的加工与测试[J]. 机械工程学报, 2008, 44 (9): 200- 204.
[4]
王伟, 陈丽洁, 贲庆玲,等. 抗高过载加速度计微结构的设计与分析[J]. 计量与测试技术, 2009, 36 (9): 5- 7.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]