[an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]Journal of Projectiles, Rockets, Missiles and Guidance >
A Study of Optimum Detonating Azimuth of Aimed Warhead
Received date: 2012-03-28
Online published: 2025-05-29
The research on optimum detonating azimuth based on aimed warhead is actually the research on servo position and pitching angles. The influence of encounter parameters on optimal detonation position was researched, and the simulation calculation of optimal detonation position of aimed warhead was established. The trend of pitching angles and azimuth angles was introduced eventually through simulating different encounter conditions. The study shows that the optimum detonating azimuth must match the encounter parameters so as to improve the efficiency of fuse warhead coordination.
QIN Shuai , YANG Suochang , SUN Jian , QIN Xin . A Study of Optimum Detonating Azimuth of Aimed Warhead[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2012 , 32(6) : 65 -67 . DOI: 10.15892/j.cnki.djzdxb.2012.06.036
| [1] | 张志鸿, 周申生. 防空导弹引信与战斗部配合效率和战斗部设计[M]. 北京: 中国宇航出版社, 2009. |
| [2] | Richard M. Lloyd. Conventional warhead systems physics and engineering design[M]. AIAA, Inc, 1998. |
| [3] | 朱景伟, 谭惠民, 樊印海. 求解定向战斗部最佳起爆延时时间和起爆方位的一种方法[J]. 宇航学报, 2003, 24 (2): 198- 201. |
| [4] | 兰志, 杨亚东, 韩玉. 起爆方式对偏心式定向战斗部破片速度分布的影响研究[J]. 弹箭与制导学报, 2010, 30 (3): 159- 161. |
| [5] | 蒋静群, 简金蕾, 张晓. 制导信息协同下的最佳起爆控制分析与研究[J]. 现代防御技术, 2009, 37 (3): 19- 25. |
/
| 〈 |
|
〉 |