[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2020 , Vol. 40 >Issue 5: 10 - 14

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2020.05.003

Experimental and Simulation Study of Laser Diode Detonation

  • ZHAN Zan 1, 2 ,
  • TAN Ming 3 ,
  • YAN Nan 1 ,
  • HE Xiang 1 ,
  • LI Chaozhen 1 ,
  • FAN Zhiwei 1
Expand
  • 1 State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
  • 2 Xi’an Aerospace Propulsion Technology Institute, Xi’an 710025, China
  • 3 Sichuan Huachuan Industries Co., Ltd, Chengdu 610106, China

Received date: 2019-06-20

  Online published: 2025-05-30

Fold

Abstract

In order to study the feasibility of laser diode detonation, the test and simulation of the laser detonation are researched. Laser initiation for PETN explosive doped with 1% carbon black is tested. Simulation model of laser detonation is established by using AUTODYN software. The test results show that the semiconductor laser can successfully detonate the PETN explosive doped with 1% carbon black, which verify the feasibility of the laser diode detonation.

Key words： laser diode; doped with carbon black; PETN explosive; AUTODYN software

Cite this article

ZHAN Zan , TAN Ming , YAN Nan , HE Xiang , LI Chaozhen , FAN Zhiwei . Experimental and Simulation Study of Laser Diode Detonation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2020 , 40(5) : 10 -14 . DOI: 10.15892/j.cnki.djzdxb.2020.05.003

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
王凯民, 温玉全. 军用火工品设计技术[M]. 北京: 国防工业出版社, 2006: 325.

[2]
SUMPTER D. Laser-initiated ordnance for air-to-air missiles:AIAA 1993-2360[R]. 1993.

[3]
CHENAULT C F, MCCRAE J E, BRYSON R R, et al. The small ICBM laser ordnance firing system:AIAA 1992-1328[R]. 1992.

[4]
SCHULZE N, MAXFIELD B, BOUCHER C. Flight demonstration of flight termination system and solid rocket motor ignition using semiconductor laser initiated ordnance:AIAA 1995-2980[R]. 1995.

[5]
BOUCHER C, OLSON S. Sea launch payload fairing separation system:AIAA 1997-2959[R]. 1997.

[6]
BLACHOWSKI T, OSTROWSKI P. Update on the development of a laser/fiber optic signal transmission system for the Advanced Technology Ejection Seat(ATES):AIAA 2001-3635[R]. 2001.

[7]
程俊. 自聚焦激光火工分离系统设计原理研究[D]. 北京: 北京理工大学, 2016.

[8]
徐姣, 吴立志, 沈瑞琪, 等. 掺杂和密闭透窗对炸药激光起爆感度的影响[J]. 火炸药学报, 2011, 34(1):77-79.

[9]
王惠娥, 沈瑞琪, 叶迎华, 等. 碳纳米管和碳黑掺杂对RDX激光点火特性的影响[J]. 爆破器材, 2012, 41(6):16-18.

[10]
刘建, 蒋小华. 含能材料激光起爆技术[J]. 激光杂志, 2013, 34(6):11-13.

[11]
刘建, 吴立志, 蒋小华, 等. 激光波长对含能材料起爆阈值的影响[J]. 红外与激光工程, 2014, 43(10):3309-3312.

[12]
陈利魁, 盛涤伦, 杨斌, 等. 掺杂对BNCP半导体激光起爆感度的影响[J]. 含能材料, 2009, 17(2):229-232.

[13]
贺爱锋, 褚恩义, 曹椿强, 等. 低温对激光起爆系统能量传输效率的影响[J]. 含能材料, 2016, 24(7):698-702.

[14]
曹军胜. 半导体激光起爆试验研究[J]. 激光杂志, 2014, 35(10):29-32.

[15]
盛涤伦, 朱雅红, 陈利魁, 等. 激光与含能化合物相互作用机理研究[J]. 含能材料, 2008, 16(5):481-486.

[16]
王浩宇, 褚恩义, 洪津, 等. 用超级电容器驱动激光起爆BNCP的技术研究[J]. 含能材料, 2019, 27(3):242-248.

[17]
陆建. 激光与材料相互作用物理学[M]. 北京: 机械工业出版社, 1996: 32.

[18]
冯博, 冯晓军, 徐洪涛, 等. 钝感剂及装药工艺对炸药燃烧转爆轰的影响[J]. 科学技术与工程, 2018, 18(9):229-232.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]