[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2024 , Vol. 44 >Issue 1: 20 - 24

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2024.01.004

Mechanical Behavior of Connecting Cable in Cabin under Radial Compression

  • HAO Yuchen 1 ,
  • XU Bin 1 ,
  • ZHANG Xiaohong 1 ,
  • LIU Guang 1 ,
  • SUN Wenzhao 1 ,
  • LI Yulin 1 ,
  • XU Quan 1 ,
  • LIN Musen 2
Expand
  • 1 Shanghai Electro-mechanical Engineering Institute, Shanghai 201109, China
  • 2 Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China

Received date: 2023-11-22

  Online published: 2024-12-28

Fold

Abstract

To investigate the mechanical behavior of cable under radial compression, this article takes the connecting cable in aircraft as the research object. The contact theory is used to describe the contact and friction behavior between internal wires. Numerical calculations are used to simulate the cable response under radial compression, and then followed by the experimental verification. The results show that the circular cross-section of the connecting cable has been changed to a butterfly shape, and the internal wire at the center of the butterfly shape has the maximum stress. The initial position of the cable has great influence on the butterfly shape and stress of wires. Based on the validation test, the most dangerous condition for cable under radial compression is proposed. The research results have significant reference for predicting and monitoring the damage of cable.

Key words： aircraft; connecting cable; radial compression; contact theory

Cite this article

HAO Yuchen , XU Bin , ZHANG Xiaohong , LIU Guang , SUN Wenzhao , LI Yulin , XU Quan , LIN Musen . Mechanical Behavior of Connecting Cable in Cabin under Radial Compression[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2024 , 44(1) : 20 -24 . DOI: 10.15892/j.cnki.djzdxb.2024.01.004

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
丁晓红, 张横, 沈洪. 高速飞行器结构优化及增材制造研究进展[J]. 空天防御, 2023, 6(2): 1-11.

DING X H, ZHANG H, SHEN H. Research progress of structural optimization and additive manufacturing on high-speed aircraft structures[J]. Air & Space Defense, 2023, 6(2): 1-11.

[2]
丁兰芳. 飞航导弹电气系统设计[M]. 北京: 宇航出版社, 2004.

DIN L F. Electrical system design for aeronautical missiles[M]. Beijing: Aerospace Publishing House, 2004.

[3]
邓腾飞, 叶永盛, 李锻能, 等. 新能源汽车车载高压电缆的有限元仿真分析[J]. 汽车零部件, 2021(9): 28-31.

DENG T F, YE Y S, LI D N, et al. Finite element simulation analysis of vehicle cables for new energy vehicles[J]. Automobile Parts, 2021(9): 28-31.

[4]
李林书, 杨杰, 胡永乐, 等. 电动汽车直流充电电缆弯曲有限元建模与仿真[J]. 电线电缆, 2019(2): 12-15.

LI L S, YANG J, HU Y L, et al. Method of constructing finite element model and simulating of dc charging cable for electric vehicles[J]. Electric Wire & Cable, 2019(2): 12-15.

[5]
刘子惠, 胡凯, 郑新龙, 等. 海底光纤复合缆机械损伤有限元仿真分析综述[J]. 光通信研究, 2023(2): 45-54.

LIU Z H, HU K, ZHENG X L, et al. Overview of finite element simulation analysis for mechanical damage of submarine optical fiber composite power cable[J]. Study on Optical Communications, 2023(2): 45-54.

[6]
胡玉娇. 光纤复合海底电缆机械行为的有限元模型研究[D]. 北京: 华北电力大学, 2018.

HU Y J. Research on finite element model of optical fiber composite submarine cables mechanical behavior[D]. Beijing: North China Electric Power University, 2018.

[7]
焦帅克, 刘聪, 张兴义, 等. 管内电缆导体截面股线接触力行为分析[J]. 中国科学: 物理学力学天文学, 2020, 50(4): 044602.

JIAO S K, LIU C, ZHANG X Y, et al. Analysis on the contact force behaviors among strands of CICC conductor cross section[J]. Sci Sin-phys Mech Astron, 2020, 50(4): 044602.

[8]
贾淑明. 超导电缆力学性能的离散元法研究[D]. 兰州: 兰州大学, 2016.

JIA S M. Mechnical analysis of the superconducting cable based on discrete element method[D]. Lanzhou: Lanzhou University, 2016.

[9]
杜微. 基于离散元法的超导电缆多层级建模及力学性能研究[D]. 兰州: 兰州大学, 2022.

DU W. Multistage modeling and mechanical properties of superconducting cables based on discrete element method[D]. Lanzhou: Lanzhou University, 2022.

[10]
孙其诚, 王光谦. 颗粒物质力学导论[M]. 北京: 科学出版社, 2009.

SUN Q C, WANG G Q. Introduction to discrete element method[M]. Beijing: Science Press, 2009.

[11]
LIN M S, WANG J H, WU B, et al. Dynamic analysis of dry storage canister and the spent fuels inside under vertical drop in HTR-PM[J]. Annals of Nuclear Energy, 2021, 154: 108030.

[12]
LIN M S, LI Y. Analysis of the interactions between spent fuel pebble bed and storage canister under impact loading[C]// National Centere for Nuclear Research. Proceedings of the HTR 2018 International Conference on High Temperature Reactor Technology. Bern: Nuclear Engineering and Design, 2020: 110548.

[13]
郝予琛, 王金华, 王海涛, 等. HTR-PM600新燃料贮存容器跌落冲击安全性能[J]. 清华大学学报(自然科学版), 2022, 62(10): 1668-1674.

HAO Y C, WANG J H, WANG H T, et al. Safety performance of HTR-PM600 fresh fuel Storage canister under drop impact[J]. Journal of Tsinghua University(Science & Technology Edition), 2022, 62(10): 1668-1674.

[14]
SIMO J C, WRIGGERS P, TAYLOR R L. A perturbed Lagrangian formulation for the finite element solution of contact problems[J]. Computer Methods in Applied Mechanics and Engineering, 1985, 50: 163-180.

[15]
ZAVARISE G, WRIGGERS P. A segment-to-segment contact strategy[J]. Mathematical and Computer Modelling, 1998, 28: 497-515.

[16]
郝予琛. 高温气冷堆新燃料运输货包安全性分析关键技术研究[D]. 北京: 清华大学, 2023

HAO Y C. Research on key technologies of safety analysis for HTR-PM fresh fuel transport package[D]. Beijing: Tsinghua University, 2023.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]