[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Review on Development of Foreign Guided Mortar Projectile

  • ZHANG Yi ,
  • WANG Qiao ,
  • CHEN Shengzheng ,
  • KANG Boyi ,
  • WANG Tianming ,
  • ZHANG Jie
Expand
  • Xi’an Modern Control Technology Research Institute, Xi’an 710065, China

Received date: 2019-10-25

  Online published: 2025-05-30

Abstract

The paper introduces the development status of the guided mortar projectile in foreign countries from the Cold War to asymmetric warfare. Due to the changes of operational requirement, guided mortar projectile switched from targeting a single target to hitting multiple types of targets. The purpose-designed precision guided munitions and guidance kits fitted to existing conventional bombs are parallel development. It shows the trend of developing to the direction of extended range, high precision, low cost and multi-mode guidance. By studying the characteristics of guided mortar projectile, the issues, such as small-scale and high-overload measurement, extended range technique, precise guidance and control technology, integrated guidance and control module low-lost and high-overload, which should be focused on the future development of the guided mortar projectile are proposed.

Cite this article

ZHANG Yi , WANG Qiao , CHEN Shengzheng , KANG Boyi , WANG Tianming , ZHANG Jie . Review on Development of Foreign Guided Mortar Projectile[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2020 , 40(5) : 76 -80 . DOI: 10.15892/j.cnki.djzdxb.2020.05.019

[an error occurred while processing this directive]
[1]
DANILKOVICH D, SHVAREV V. aThe study of missle and artillery systems market in 2001—2010 and through to 2015. TArms Markets 22008, 8(3): 1-27.

[2]
WILLIAMS A G. Booming away: automatic cannon and ammunition developments[J]. Jane’s International Defense Review, 2015, 48(1): 42-46.

[3]
LIU J, LI J, KE Y, et al. Application technology of MEMS inertial system[C]// IEEE. Proceedings of the 2010 International Conference on Intelligent System Design and Engineering. New York: IEEE, 2010: 379-381.

[4]
陈胜政, 杨波, 杨栓虎, 等. 脉冲修正弹药技术研究[J]. 兵器装备工程学报, 2017, 38(12):60-64.

[5]
卜奎晨, 刘莉. 末制导炮弹发展趋势及其研究方向[J]. 系统工程与电子技术, 2006, 28(11):1709-1711.

[6]
曹红锦, 葛致磊. 滑翔增程弹弹道优化设计研究[J]. 四川兵工学报, 2013, 34(11):8-10.

[7]
肖亮, 王中原, 史金光. 滑翔增程炮弹的气动布局与外形参数优化设计分析[J]. 火力与指挥控制, 2011, 36(3):101-104.

[8]
曹红锦. 美国精确制导组件技术发展现状分析[J]. 四川兵工学报, 2015, 36(9):22-25.

[9]
FROYUM K, GOEPFERT S, HENRICKSON J, et al. Honeywell micro electro mechanical systems(MEMS) intertial measurement unit(IMU)[C]// IEEE. Proceedings of the 2012 IEEE/ION Position, Location and Navigation Symposium. New York: IEEE, 2012: 831-836.

[10]
冯凯强. 制导弹药用MEMS-INS/GNSS组合导航系统关键技术研究[D]. 太原: 中北大学,2019:9-13.

[11]
徐云. 制导炮弹用MINS/GNSS组合导航系统的若干关键技术研究[D]. 南京: 南京理工大学,2016:10-13.

[12]
王萌. MINS/GPS/GM组合导航系统设计与关键技术研究[D]. 哈尔滨: 哈尔滨工程大学,2019:2-8.

[13]
郑健, 周长省, 陈雄. 冲压增程炮弹发展研究[J]. 兵工自动化, 2011, 30(11):12-15.

Outlines

/

[an error occurred while processing this directive]