[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2011 , Vol. 31 >Issue 2: 86 - 88

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.02.060

PROJECTILES TECHNOLOGY

The Effect of Different Charging Process on Charge Safety

  • ZHANG Tao ,
  • XIAO Yang ,
  • GUO Xiaohong ,
  • LI Pengfei ,
  • YAO Xingzhu
Expand
  • No. 204 Research Institute of China Ordnane Industries, Xi'an 710065, China

Received date: 2010-01-18

  Online published: 2025-05-30

Fold

Abstract

The stress tests of cast-loaded charge, press-loading charge and casting charge were performed by the big dropping hammer shocking on the simulated load device respectively, and their ground dynamic safety tests were completed by shocking at hard target on test range. The results showed the sensitivity of press-loading charge was lower than cast-loaded charge and casting charges under the same test condition.

Key words： simulated load; charge safety; load stress test; charge process

Cite this article

ZHANG Tao , XIAO Yang , GUO Xiaohong , LI Pengfei , YAO Xingzhu . The Effect of Different Charging Process on Charge Safety[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2011 , 31(2) : 86 -88 . DOI: 10.15892/j.cnki.djzdxb.2011.02.060

[an error occurred while processing this directive]

References

[1]
黄正平. 炸药装药发射安全性研究的文献调研报告[R]. 北京: 北京理工大学.
[2]
王儒策, 赵国志. 弹道终点效应[M]. 北京: 北京理工大学出版社, 1993.
[3]
都兴良. 国内外炮弹膛炸事故及分析[M]. 南京: 南京理工大学出版社, 1995.
[4]
王淑萍. 撞击作用下炸药装药的尺寸效应研究[J]. 火炸药学报, 2000, 23(4): 18-20.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]