[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2011 , Vol. 31 >Issue 5: 99 - 101,106

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.05.068

PROJECTILES TECHNOLOGY

The Research on Composite Structure of Shielding Cover in Protection Engineer

  • GAO Guangfa ,
  • LI Yongchi ,
  • LI Ping ,
  • HUANG Ruiyuan
Expand
  • 1 School of Energy and Safety, Anhui University of Science and Technology, Anhui Huainan 232001, China;
    2 Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, China;
    3 The Key Laboratory of Safe and Efficient Mining Cosponsored by Anhui Province and Ministry of Education, Anhui Huainan 232001, China

Received date: 2010-10-30

  Online published: 2025-05-30

Fold

Abstract

As for the design of shielding cover in protection engineer, the research status of shielding cover was analyzed and summarized, and the advanced layout of the shielding cover was developed on the basis of test results and theoretical analysis. The results show that the layered structure including yaw layer and main body should be adopted in the design of shielding cover. Spheres made of corundum or ceramic or hard rock could be selected for the body materials in the yaw layer. The main body structure is a kind of sandwich structure, and the modular honeycomb texture made of steel shells or glassfibre reinforced plastic shell and steel fiber reinforced concrete should be adopted.

Key words： protection engineer; shielding cover; honeycomb texture; layered structure; yaw

Cite this article

GAO Guangfa , LI Yongchi , LI Ping , HUANG Ruiyuan . The Research on Composite Structure of Shielding Cover in Protection Engineer[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2011 , 31(5) : 99 -101,106 . DOI: 10.15892/j.cnki.djzdxb.2011.05.068

[an error occurred while processing this directive]

References

[1]
葛涛, 潘越峰, 谭可可,等. 活性粉末混凝土抗冲击性能研究[J]. 岩石力学与工程学报, 2007, 26(增1): 3553-3557.
[2]
杨建超,吴飚,金栋梁.花岗岩块石浆砌结构抗弹丸斜侵彻/冲击性能实验研究[J].实验力学,2009,24(5):467-472.
[3]
唐德高,贺虎成,陈向欣,等.刚玉块石混凝土抗弹丸侵彻效应试验研究[J].振动与冲击,2005,24(6):37-39.
[4]
纪冲,龙源,万文乾,等.钢纤维混凝土抗侵彻与贯穿特性的实验研究[J].爆炸与冲击,2008,28(2):178-185.
[5]
王耀华,肖燕妮,毕亚军,等.钢丝网增强活性粉末混凝土抗侵彻特性[J].解放军理工大学学报:自然科学版,2008,9(1):57-61.
[6]
石少卿,黄翔宇,刘颖芳,等,多边形钢管混凝土短构件在防护工程中的应用[J].混凝土,2005(2):95-98.
[7]
周布奎,唐德高,陈向欣,等.单层紧密排列刚玉球砼抗弹丸冲击特性分析「J].振动与冲击,2002,21(4):87-89.
[8]
Rosenberg Z,Dekel E. On the role of nose profile in long-rod penetration[J]. International Journal of Impact Engineering,1999,22(5):551-557.
[9]
高光发,李永池,胡秀章,等.一种改进的混凝土抗侵彻工程模型及算法[J].兵器材料科学与工程,2011,34(2):11-15.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]