[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2022 , Vol. 42 >Issue 1: 38 - 41

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2022.01.008

Mathematical Model of Ultrasonic Signal Transmission in Solid Rocket Motor Multilayer Structure

  • GUO Xufei 1, 2
Expand
  • 1 Department of Physics, Lvliang University, Lvliang 033001, Shanxi,China
  • 2 Shanxi Key Laboratory of Signal Capturing & Processing, North University of China, Taiyuan 030051, China

Received date: 2021-09-11

  Online published: 2025-02-21

Fold

Abstract

In this article, the mechanism of ultrasonic signal transmission in solid rocket motor multilayer structure was studied from the perspective of linear system signal transmission, and a mathematical model of the ultrasonic amplitude spectrum acting perpendicularly to the multilayer structure was derived. Then Matlab software was used in order to obtain the amplitude-frequency and phase- frequency characteristic curve of the multilayer structure. The simulation results show that for a multi-layer structure composed of steel and rubber, the debonding of the first interface can be predicted by using the amplitude-frequency and phase frequency characteristics. If the debonding depth of the second interfaces gradually increases, the corresponding amplitude-frequency and phase-frequency characteristics will change slightly.

Key words： solid rocket motor; multilayer structure; amplitude spectrum; interface debonding

Cite this article

GUO Xufei . Mathematical Model of Ultrasonic Signal Transmission in Solid Rocket Motor Multilayer Structure[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2022 , 42(1) : 38 -41 . DOI: 10.15892/j.cnki.djzdxb.2022.01.008

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
段方勇, 黄载禄. 多层复合介质的超声幅频特性[J]. 数据采集与处理, 1991, 6(3):17-23.

[2]
张建生. 钢层下多层橡胶粘接界面脱黏的超声检测信号处理技术研究[D]. 北京: 中国科学院声学研究所, 2000.

[3]
简晓明. 超声检测中信号处理研究[D]. 北京: 中国科学院声学研究所, 1999.

[4]
HÄGGLUND F L, CARLSON J E, ANDERSSON T. Ultrasonic classification of thin layers within multi-layered materials[J]. Measurement Science and Technology, 2010, 21: 015701.

[5]
HÄGGLUND F, MARTINSSON J, CARLSON J E. Model-based estimation of thin multi-layered media using ultrasonic measurements[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2009, 56(8): 1689-1702.

[6]
闫鑫. 高声阻抗表面层分层材料粘接缺陷超声定征基础研究[D]. 上海: 同济大学, 2008.

[7]
PINTELON R, SCHOUKENS J. System identification: a frequency domain approach[M]. New York: IEEE Press, 2001: 33-34.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]