[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2014 , Vol. 34 >Issue 2: 63 - 66

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2014.02.021

PROJECTILES TECHNOLOGY

Numerical Simulation System of Shaped Charge Study on Perforating Charge

  • HAO Yongping ,
  • XU Jing
Expand
  • School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110159, China

Received date: 2013-05-20

  Online published: 2025-05-30

Fold

Abstract

To achieve visualization modeling and applied analysis of perforating charge, a new method based on VB and ANSYS secondary development was proposed. Parameterization design of human-computer interaction was established via integration of interface and interoperability of relevant information. Instance was used to verify the developed system; the results show that the developed system can realize model calculation and process visualization. Compared with the result of tests, it complies with the design requirements.

Key words： shaped charge; secondary development; parameterization

Cite this article

HAO Yongping , XU Jing . Numerical Simulation System of Shaped Charge Study on Perforating Charge[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2014 , 34(2) : 63 -66 . DOI: 10.15892/j.cnki.djzdxb.2014.02.021

[an error occurred while processing this directive]

References

[1]
娄寿春 地空导弹射击指挥控制模型[M]. 北京: 国防工业出版社, 2009.
[2]
肖秦琨, 高嵩, 高晓光. 动态贝叶斯网络推理学习理论及应用[M]. 北京: 国防工业出版社, 2007.
[3]
张连文, 郭海鹏. 贝叶斯网引论[M]. 北京: 科学出版社, 2006.
[4]
刘向东, 刘天生, 王凤英. 壁厚变化率对小锥角聚能射流形成影响的数值模拟[J]. 弹箭与制导学报, 2010, 30(3): 96-98.
[5]
王欣, 徐树成, 任吉堂. 有限元软件 ANSYS 的二次开发及其与VB的连接[J]. 河北理工学院学报, 2004, 26(4): 37-39.
[6]
贺建磊, 张炳军, 盛军, 等. 射孔弹穿深与孔径模拟分析[J]. 理论研究测井技术, 2008, 32(2): 110-113.
[7]
崔伟峰, 杜耀志, 周腊久, 等. Ls-dyna 在聚能射流模拟中的应用[J]. 采矿技术, 2007, 27(3): 53-54.
[8]
何海洋. LS-DYNA 的前后处理及其运行方式[OL].中国科技论文在线2008-05-22].
[9]
金玮玮, 张昭, 韩秀清, 等. 射孔枪射流形成的数值模拟与弹壳设计[J]. 塑性工程学报, 2010, 17(6): 121-126.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]