[an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]Journal of Projectiles, Rockets, Missiles and Guidance >
The Method for Surface Defect Inspection of Coating Based on Mathematical Morphology
Received date: 2016-05-14
Online published: 2025-05-30
The surface defect inspection of coating is an important means to ensure the quality of solid rocket motor charge. As for surface defect images of coating, the combination of top-hat and bottom-hat of mathematical morphology was used to enhance the defect characteristic. The segmentation of defect image was realized by high-low threshold and binary image was obtained. The valid inspection region was achieved by centre-radius calibration, and the size and location of defect were calculated. The results show that the precision of location is less than 0.4 mm, the resolution can reach 0.5 mm, and the precision of size is less than 0.2 mm.
JIN Yong , DENG Bowen , ZHAO Lei , KONG Xiaoli , YANG Xiaohui . The Method for Surface Defect Inspection of Coating Based on Mathematical Morphology[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2014 , 34(6) : 150 -152,156 . DOI: 10.15892/j.cnki.djzdxb.2014.06.038
| [1] | 郭慧平, 王召巴, 金永. 火箭发动机包覆层表面缺陷检测系统研究[J]. 电子测试, 2011 (2): 71-75. |
| [2] | 陈国栋, 王召巴, 金永, 等. 火箭发动机包覆层表面缺陷定位技术[J]. 山西电子技术, 2011 (3): 31-34. |
| [3] | 刘志敏, 杨杰. 基于数学形态学的图像形态滤波[J]. 红外与激光工程, 1999, 28(4): 1-16. |
| [4] | 崔宝侠, 李爱军, 苏桂华. 基于数学形态学的交通图像滤波处理方法研究[J]. 沈阳工业大学学报, 2007, 29(2): 192-199. |
| [5] | 朱晓亮, 彭复员, 杨述斌, 等. 基于多尺度形态学的弱目标图像处理方法[J]. 红外与激光工程, 2002, 31(6): 482-485. |
/
| 〈 |
|
〉 |