[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
Academic article

Study on the Penetration Efficiency of Ceramic Fragments on Thin Aluminum Targets

  • TIAN Xueliang , 1, 2 ,
  • JING Tong 3 ,
  • ZHAO Taiyong 2 ,
  • SHEN Qinyun 4 ,
  • HU Qiong 4 ,
  • ZHENG Canjie 5 ,
  • WANG Weizhan , 2, * ,
  • LV Tenghui 1, 2
Expand
  • 1 School of Mechanical and Electrical Engineering,North University of China,Taiyuan 030051,Shanxi,China
  • 2 Institute of Intelligent Weapons,North University of China,Taiyuan 030051,Shanxi,China
  • 3 Xi’an Modern Control Technology Research Institute,Xi’an 710000,Shaanxi,China
  • 4 Heilongjiang North Tool Co.,LTD.,Mudanjiang 157000,Heilongjiang, China
  • 5 Shandong Special Industry Group Co.,LTD.,Zibo 255201,Shandong,China

Received date: 2024-11-04

  Online published: 2026-01-24

Abstract

In order to explore the penetration efficiency of ceramic fragments and post-target damage effect,ballistic impact test and FEM-SPH algorithm were used in the study to study the penetration efficiency of ceramic fragments and the damage effect of debris cloud after target by changing the penetration velocity,fragment size and penetration angle of ceramic fragments.The results show that the penetration ability of ZrO2 ceramic fragments is stronger than that of Al2O3 ceramic fragments.With the increase of penetration velocity and fragment size,the reaming effect of aluminum target is enhanced,the volume of post-target debris cloud,the mass loss of after-effect target,the perforation diameter and the damage area increase.With the increase of the penetration angle,the perforation shape of the aluminum target changes from circular to oval,the perforation area decreases first and then increases,the volume of post-target debris cloud,the mass loss of the after-effect target,the perforation diameter and the damage area increase first and then decrease.The research results are of reference significance for the evaluation of the damage caused by ceramic fragments penetrating the outer shell of spacecraft and the internal circuit board.

Cite this article

TIAN Xueliang , JING Tong , ZHAO Taiyong , SHEN Qinyun , HU Qiong , ZHENG Canjie , WANG Weizhan , LV Tenghui . Study on the Penetration Efficiency of Ceramic Fragments on Thin Aluminum Targets[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2025 , 45(6) : 1120 -1137 . DOI: 10.15892/j.cnki.djzdxb.2025.06.021

[an error occurred while processing this directive]
[1]
蔡治城, 许泽建, 郭保桥, 等. 氧化锆陶瓷的动态弯曲断裂行为[J/OL]. 兵工学报, 2024, 12(8):1-10. http://kns.cnki.net/kcms/detail/11.2176.TJ.20240328.1433.004.html.

CAI Z C, XU Z J, GUO B Q, et al. Dynamic Bending Fracture Behavior of Zirconia Ceramic[J]. Acta Armamentarii, 2024, 12(8):1-10. http://kns.cnki.net/kcms/detail/11.2176.TJ.20240328.1433.004.html.

[2]
霍子怡, 何成龙, 贾松, 等. 陶瓷/纤维防弹板在多发冲击下能量耗散和损伤评估[J/OL]. 兵工学报, 2024, 12(8):1-14. http://kns.cnki.net/kcms/detail/11.2176.tj.20241104.1257.006.html.

HUO Z Y, HE C L, JIA S, et al. Energy Dissipation and Damage Assessment of the Ceramic/Fiber Ballistic Plate Under Multi-impacts[J]. Acta Armamentarii, 2024, 12(8):1-14. http://kns.cnki.net/kcms/detail/11.2176.tj.20241104.1257.006.html.

[3]
HUANG J Y, LIN C K, BIAN Y L, et al. Strain rate effects on fragment morphology of ceramic alumina:A synchrotron-based study[J]. International Journal of Mechanical Sciences,2024:280.

[4]
WANG W Z, CHEN Z G, FENG S S, et al. Experimental study on ceramic balls impact composite armor[J]. Defence Technology, 2020,(16):408-416.

[5]
WANG W Z, TIAN P, Lu W J, et al. On the penetration efficiency of ceramic fragments through steel targets[J]. International Journal of Nonlinear Sciences and Numerical Simulation, 2023, 24(7):2587-2604.

DOI

[6]
TINU J P, JENSIN J J, DALBIR S L, et al. Analysis of bullet impact test on aluminum alloy plates at varying thickness and velocities[J]. Materials Today:Proceedings, 2024.

[7]
夏靖雯, 陈智刚, 顾敏辉, 等. 钨合金破片侵彻2024铝靶的数值模拟研究[J]. 振动与冲击, 2023, 42(15):156-162,224.

XIA J W, CHEN Z G, GU M H, et al. Numerical simulation for tungsten alloy fragments penetrating 2024 aluminum target[J]. Journal of Vibration and Shock, 2023, 42(15):156-162,224.

[8]
窦慧敏, 陈智刚, 易荣成, 等. 钨球斜侵彻钛合金靶试验及数值模拟研究[J]. 兵器装备工程学报, 2023, 44(11):162-170.

DOU H M, CHEN Z G, YI R C, et al. Experimental and numerical simulation study of tungsten ball oblique penetration through titanium alloy target[J]. Journal of Ordnance Equipment Engineering, 2023, 44(11):162-170.

[9]
王维占, 赵太勇, 冯顺山, 等. 12.7mm动能弹斜侵彻复合装甲的数值模拟研究[J]. 爆炸与冲击, 2019, 39(12):81-90.

WANG W Z, ZHAO T Y, FENG S S, et al. Numerical simulation study on penetration of a 12.7mm kinetic energy bullet into a composite armor[J]. Explosion and Shock Waves, 2019, 39(12):81-90.

[10]
WU C Y, CHEN X W, HE Q G, et al. Study on damage mechanism and damage distribution of the rear plate under impact of debris cloud[J]. Defence Technology, 2024,(35):151-167.

[11]
WU C Y, HE Q G, CHEN X W, et al. Debris cloud structure and hazardous fragments distribution under hypervelocity yaw impact[J]. Defence Technology, 2023,(27):169-183.

[12]
YU S X, FAN Q B, CHENG X W, et al. Numerical simulation of the process of Zr58Nb3Cu12Ni12Al15 bulk glasses fragment penetrating into two separated plates and forming debris cloud[J]. Journal of Materials Research and Technology, 2022,(19):2115-2125.

[13]
李小军, 李伟, 王维占, 等. TC动能弹斜侵彻复合装甲的数值模拟分析[J]. 兵器装备工程学报, 2019, 40(03):52-56.

LI X J, LI W, WANG W Z, et al. Numerical Simulation Analysis of TC Kinetic Energy Projectile Penetrating into Composite Armor[J]. Journal of Ordnance Equipment Engineering, 2019, 40(03):52-56.

[14]
周峰, 陈俊, 袁勇, 等. 钨丝/锆基非晶弹芯贯穿靶板靶后破片飞散特性[J]. 弹道学报, 2024, 36(03):75-81.

ZHOU F, CHEN J, YUAN Y, et al. Disperse Characteristic of Behind-target Debris Formed by Tungsten Fiber/Zr-based Bulk Metallic Glass Matrix Composite Rod Penetrating Steel Target[J]. Journal of Ballistics, 2024, 36(03):75-81.

[15]
HE Q G, CHEN X W, CHEN J F. Finite element smoothed particle hydrodynamics adaptive method in simulating debris cloud[J]. Acta Astronautica, 2020,(175):99-117.

[16]
李小军, 王维占, 张银, 等. 7.62mm穿甲子弹斜侵彻复合装甲仿真研究[J]. 装甲兵工程学院学报, 2018, 32(05):71-75.

LI X J WANG W Z, ZHANG Y, et al. Simulation Study on Oblique Penetration of 7.62mm Armour-piercing Projectile into Composite Armor[J]. Journal of Armored Forces, 2018, 32(05):71-75.

[17]
王维占, 陈智刚, 李小军, 等. 7.62mm子弹的两种典型破坏特性研究[J]. 兵工学报, 2018, 39(S1):17-22.

WANG W Z, CHEN Z G, LI X J, et al. Research on Two Typical Failure Modes of 7.62mm Bullet[J]. Acta Armamentarii, 2018, 39(S1):17-22.

[18]
赵太勇, 王维占, 赵军强, 等. 12.7mm动能弹侵彻装甲钢板的结构响应特性研究[J]. 兵器装备工程学报, 2020, 41(10):146-149.

ZHAO T Y, WANG W Z, ZHAO J Q, et al. Study on Structural Response Characteristics of 12.7mm Kinetic Energy Projectile Penetrating Armor Plate[J]. Journal of Ordnance Equipment Engineering, 2020, 41(10):146-149.

[19]
任思远, 武强, 张品亮, 等. 活性弹丸超高速撞击蜂窝夹芯板双层结构的损伤特性[J]. 爆炸与冲击, 2024, 44(07):83-96.

REN S Y,WU Q,ZHANG P L,et al. A study of damage characteristics caused by hypervelocity impact of reactive projectile on the honeycomb sandwich panel double-layer structure[J]. Explosion and Shock Waves, 2024, 44(07):83-96.

[20]
闫慧明. 环氧树脂-蜂窝铝夹芯板面内压缩、剪切试验研究与数值模拟[D]. 河北: 燕山大学, 2020.

YAN H M, Experimental study and numerical simulation of in-surface compression and shear of epoxy resin-honeycomb aluminum sandwich panel[D]. Hebei: Yanshan University, 2020.

[21]
陈海燕, 张希, 许家忠, 等. 对称玻璃钢大锥环内固化成型研究及数值模拟[J]. 玻璃钢/复合材料, 2016,(03):49-54.

CHEN H Y, ZHANG X, XU J Z, et al. Research and numerical simulation on inner curing of large cone of symmetrical glass fiber reinforced plastics[J]. Composites Science and Engineering, 2016,(03):49-54.

[22]
葛东云, 刘元镛, 宁荣昌. 增韧环氧树脂的动态裂纹扩展研究[J]. 实验力学, 1999,(01):61-69.

GE D Y, LIU Y Y, NING R C. Study on dynamic crack propagation of toughened epoxy resin[J]. Journal of Experimental Mechanics, 1999,(01):61-69.

[23]
VAYIG Y, ORNAI D, SHNECK R. Penetration performance and failure of long rods impacting aluminum targets[J]. International Journal of Impact Engineering, 2024,185:104836.

Outlines

/

[an error occurred while processing this directive]