[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2022 , Vol. 42 >Issue 6: 94 - 98

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2022.06.014

Research on the Influence of Cable Network Laying on the Quality Characteristic Parameters of Small-caliber Guided Munitions

  • LI Wenhao ,
  • BIAN Chengfei ,
  • LI Qian ,
  • WANG Chong ,
  • LIAO Tianhe ,
  • YING Jiaqi
Expand
  • Xi’an Modern Control Technology Research Institute,Xi’an 710065,China

Received date: 2022-07-11

  Online published: 2025-02-25

Fold

Abstract

In this paper, a certain type of small precision strike missile is taken as the research object, and the structural model of the cable network on the missile is constructed by using the NX three-dimensional design software. The influence law of the cable laying on the quality parameters such as product quality, center of mass and mass deviation is studied, and the net laying plan has been optimized. After optimization, the measured mass of the projectile is reduced by 245 g compared with the original state, and the mass deviation is reduced by 0.061 mm.The research results show that this method can improve the efficiency and quality of cable network laying design, and provide a basis for the design of the electric and the structure of the projectile, which has important engineering significance for improving quality and efficiency.

Key words： cable network laying; guided munitions; quality characteristic; optimized design

Cite this article

LI Wenhao , BIAN Chengfei , LI Qian , WANG Chong , LIAO Tianhe , YING Jiaqi . Research on the Influence of Cable Network Laying on the Quality Characteristic Parameters of Small-caliber Guided Munitions[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2022 , 42(6) : 94 -98 . DOI: 10.15892/j.cnki.djzdxb.2022.06.014

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
于涛. EWIS线束敷设路径自动规划分析[J]. 现代制造技术与装备, 2021, 57(4):136-137.

[2]
薛静, 赵寻珂, 徐宗胜, 等. 弹上电缆网成型及检测工艺改进[J]. 航天制造技术, 2019(1):38-41.

[3]
魏发远, 王峰军, 陈新发. 含有柔性电缆的复杂系统装配仿真[J]. 工程设计学报, 2007, 14(1):25-30.

[4]
胡延平, 孙哲, 张岩. 船舶电缆虚拟敷设仿真平台的研究与实现[J]. 计算机测量与控制, 2015, 23(10):3471-3475.

[5]
孟光伟, 王萌, 顾浩卿, 等. 弹上电缆网三维设计及虚拟装配方法[J]. 电子测试, 2016(3):15-17.

[6]
傅洪全, 马俊, 邵九, 等. 基于VR技术的智能化电缆敷设平台的设计及实现研究[J]. 电气技术与经济, 2019(6):17-19.

[7]
李文昊, 蒲瑶, 张立新, 等. 小型战术导弹弹上电缆网敷设设计[J]. 弹箭与制导学报, 2021, 41(3):53-56.

DOI

[8]
罗和顺. 直升机电缆敷设方法探究与仿真[J]. 科学技术创新, 2018(12):32-33.

[9]
刘召朝, 张丹, 周琛, 等. 基改进粒子群算法的多分支电缆自动布线技术[J]. 机械制造与自动化, 2021, 50(1):177-179.

[10]
罗明亮, 张明, 杨继国, 等. EWIS线束敷设路径自动规划[J]. 飞机设计, 2020. 40(1):16-20.

[11]
李明, 李彬. 弹上电缆网轻小型化技术研究[J]. 航天制造技术, 2022(1):46-50.

[12]
夏文涛, 邵云峰. 弹上电气系统电缆网轻小型化的构想与设计[J]. 现代防御技术, 2006, 34(2):20-23.

[13]
田大可, 金路, 张德志. 航空发动机质量特性参数建模与分析[J]. 机械设计与制造, 2016(12):21-23.

[14]
周燕. 弹箭质量特性参数综合测试系统设计[D]. 南京: 南京理工大学, 2006.

[15]
温晶晶, 邓聃, 吴斌. 无人机质量特性参数一体化测量系统的研究[J]. 2018, 39(2):145-150.

[16]
王佳昌, 于海莲, 余纬, 等. 小角度翻转法质量质心测量及误差分析[J]. 工具技术, 2020, 54(2):82-87.

[17]
王学仓. 导弹质量特性参数测量系统设计及分析[D]. 哈尔滨: 哈尔滨工业大学, 2014.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]