Several Issues in the Safety Design of Sub-munitions Fuze Combined with the MIL-STD-1316F

QIN Dongze; HE Guanglin

doi:10.15892/j.cnki.djzdxb.2019.06.016

Journal of Projectiles, Rockets, Missiles and Guidance >

2019 , Vol. 39 >Issue 6: 71 - 74

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2019.06.016

Several Issues in the Safety Design of Sub-munitions Fuze Combined with the MIL-STD-1316F

QIN Dongze ¹^,² ,
HE Guanglin ³

Expand

¹ School of Mechatronics Engineering, North University of China, Taiyuan 030051, China
² Shanxi Key Laboratory of Advanced Manufacturing Technology, Taiyuan 030051, China
³ School of Mechatronical Engineering, Beijing Institute of Technology, Beijing 100081, China

Received date: 2018-11-08

Online published: 2025-05-12

Fold

Abstract

For further improving the safety of the submunition fuze,the US military fuze safety standard MIL-STD-1316 was analyzed.Then several concepts about the submunition fuze have been discussed.On this basis, in order to the safety, several issues in submunition fuze designing were analyzed.By the system analyzing methods with the typical submunition fuses, conclusion as follows:the nested safety can’t be independently used as one of the safety in redundant safety.However, it can be used as a procedure of relieving safety before submunition fuze activated.The start time of the submunition fuze feature(s) system is not related to whether its safety system is armed.For the submunition fuze with arming delay devices, self-destruct feature(s) shall be operated after the arming delay.On the other hand, for the submunition fuze without arming delay devices, self -destruct feature(s) should be performed after the fuse is armed.

Key words： sub-munitions; arming devices; fuze safety; self-destruction

Cite this article

QIN Dongze , HE Guanglin . Several Issues in the Safety Design of Sub-munitions Fuze Combined with the MIL-STD-1316F[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2019 , 39(6) : 71 -74 . DOI: 10.15892/j.cnki.djzdxb.2019.06.016

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Department of Defense. Fuze design, safety criteria for :MIL-STD-1316F[S].[S.l.]:US Military Specs/Standards/Handbooks, 2017.]

[2]	Department of Defense. Fuze design, safety criteria for :MIL-STD-1316E[S].[S.l.]:US Military Specs/Standards/Handbooks,1998.]

[3]	国防科学技术工业委员会. 引信安全性设计准则:GJB373A-1997[S]. 北京: 国防科工委军标出版发行部.1997.

[4]	秦栋泽, 范宁军. 集束子弹药引信降危系统基本理论[J]. 北京理工大学学报, 2013, 33(3):225-228.

[5]	秦栋泽, 范宁军. 集束子弹药引信自失效、自失能技术路线及典型设计可靠度分析[J]. 兵工学报, 2013, 34(6):684-689.

[6]	秦栋泽. 集束子弹药引信有关概念及“三自”组合设计方法[J]. 兵工学报, 2016, 37(2):239-244.

[7]	QIN Dongze, FAN Ningjun. Weight distribution of sub-munitions fuze design[J]. Journal of Beijing Institute of Technology, 2013, 22(2):153-157.

[8]	秦栋泽, 范宁军. 自毁装置的安全性和可靠性[J]. 爆炸与冲击, 2014, 34(1):111-114.

[9]	秦栋泽, 吴炎烜, 范宁军, 等. 降低集束子弹药未爆弹率的技术路线[J]. 探测与控制学报, 2011, 33(5):24-28.

[10]	Department of Defense.Military handbook fuzes:MIL-HDBK-145C[S].[S.l.]:US Military Specs/Standards/Handbooks, 2000.

[11]	KING Colin, DULLUM Ove, ØSTERN Grethe. M85:an analysis of reliability[R].[S.l.:s.n.],2007:24-25.

[12]	STRICKLAND S M. Adding an electronic self-destruct mo de to the destruct mode to the M230 fuze[C]// NDIA.Proceedings of 47th NDIA Annual Fuze Conference.[S.l.:s.n.], 2003.

Options

Outlines