[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2024 , Vol. 44 >Issue 2: 82 - 89

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2024.02.013

Research on Variable Hetz Airflow Expansion Channel Based on Rocket Sled

  • XIE Botao 1, 2 ,
  • LIU Zhen 1 ,
  • ZHANG Chenhui 2 ,
  • LIU Xianwei 2
Expand
  • 1 School of Aerospace Engineering, Xi’an Jiaotong University, Xi’an 710049,Shaanxi, China
  • 2 Norinco Group Test and Measuring Academy, Huayin 714200,Shaanxi, China

Received date: 2023-12-12

  Online published: 2024-12-28

Fold

Abstract

The application of airflow expansion channel device in rocket sled test can obtain higher airflow velocity at the exit, so as to realize the simulation of hypersonic environment. The design and numerical simulation of airflow channel device for rocket sled are studied. Firstly, the internal part of the air expansion channel is divided into initial source flow expansion area, wave attenuation area and uniform flow test area. Foelsch method is used to design the initial expansion section profile, and the characteristic method based on the preset Mach number of the axis is used to design the transition wave attenuation band. On this basis, numerical simulation analysis is carried out for the rocket sled air expander with a growth rate of 2.5 at the operating speeds of 1.5Ma, 2Ma, 2.5Ma and 3Ma. The results showed that the expansion wave at the inlet of the channel weakened with the increase of the operating speed. The peak relative pressure at 1.5Ma is 0.14MPa, and the peak relative pressure at 3Ma is 0.018 MPa. The decrease of relative pressure is about 87% and the inlet condition is improved. After data comparison,the maximum mach number simulation deviation is 3.9%, and the static pressure simulation deviation is 6.5%.

Key words： rocket sled; hypersonic environment; air-expansion channel; characteristic method

Cite this article

XIE Botao , LIU Zhen , ZHANG Chenhui , LIU Xianwei . Research on Variable Hetz Airflow Expansion Channel Based on Rocket Sled[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2024 , 44(2) : 82 -89 . DOI: 10.15892/j.cnki.djzdxb.2024.02.013

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
肖军, 耿强, 徐进欣, 等. 常规兵器火箭橇试验速度影响因素分析[J]. 兵器装备工程学报, 2021, 42(3): 83-87.

XIAO J, GENG Q, XU J X, et al. Analysis of factors influencing the speed of conventional weapon rocket sled test[J]. Journal of Ordnance Equipment Engineering, 2021, 42(3): 83-87.

[2]
夏有财, 孙其会, 肖军, 等. 火箭橇运动计算算法优化与试验验证[J]. 航空动力学报, 2021, 36(7): 1564-1568.

XIA Y C, SUN Q H, XIAO J, et al. Optimization and experimental verification of rocket sled motion calculation algorithm[J]. Journal of Aerospace Power, 2021, 36(7): 1564-1568.

[3]
余元元, 叶俊杰, 张雨诗, 等. 火箭橇轨道系统瞬态动力学特性研究[J]. 兵器装备工程学报, 2019, 40(12): 205-209.

YU Y Y, YE J J, ZHANG Y S, et al. Research on transient dynamic characteristics of rocket sled track system[J]. Journal of Ordnance Equipment Engineering, 2019, 40(12): 205-209.

[4]
汪运鹏, 姜宗林. 高超声速喷管设计理论与方法[J]. 力学进展, 2021, 51(2): 257-294.

WANG Y P, JIANG Z L. A review of theories and methods for hypersonic nozzle design[J]. Advances in Mechanics, 2021, 51(2): 257-294.

[5]
刘亚洲, 李平, 陈宏玉, 等. 不同延伸段压力分布的双钟形喷管设计[J]. 航空动力学报, 2022, 37(2): 424-432.

LIU Y Z, LI P, CHEN H Y, et al. Design of double bell shaped nozzles with different extension pressure distribution[J]. Journal of Aerospace Power, 2022, 37(2): 424-432.

[6]
ZHOU X W, XU J, LYU S Y. Verification of a ground-based method for simulating high-altitude, supersonic flight conditions[J]. International Journal of Computational Materials Science and Engineering, 2018, 7(1): 1850005.

[7]
王英鹏, 徐义华, 孙海俊, 等. 基于响应面法的火箭发动机喷管型面优化设计[J]. 航空动力学报, 2022, 37(1): 214-224.

WANG Y P, XU Y H, SUN H J, et al. Optimization design of rocket engine nozzle profile based on response surface methodology[J]. Journal of Aerospace Power, 2022, 37(1): 214-224.

[8]
陈以勒, 俞凯凯, 徐惊雷. 几何尺寸约束的超燃冲压发动机推力喷管设计[J]. 航空学报, 2021, 42(6): 253-263.

CHEN Y L, YU K K, XU J L. Design of thrust nozzle for scramjet engine with geometric dimension constraints[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(6): 253-263.

[9]
FOELSCH K. The analytical design of an axially symmetric laval nozzle for a parallel and uniform jet[J]. Journal of the Aeronautical Sciences, 1948, 16: 161-188.

[10]
SIVELLS J C. Aerodynamic design of axisymmetric hypersonic wind-tunnel nozzles[J]. Journal of Spacecraft, 1970, 7: 1292-1299.

[11]
张亚林, 李晓松. 改进AOA结合贝塞尔曲线平滑的机器人路径规划[J]. 计算机工程与设计, 2023, 44(10): 3170-3178.

ZHANG Y L, LI X S. Improving robot path planning by combining AOA with bessel curve smoothing[J]. Computer Engineering and Design, 2023, 44(10): 3170-3178.

[12]
张晨辉, 徐健. 火箭橇试验战斗部动态攻角交互式计算与验证[J]. 弹箭与制导学报, 2020, 40(2): 89-92.

ZHANG H, XU J. Interactive calculation and verification of dynamic attack angles of rocket sled test subjects[J]. Journal of Projectiles, Rockets, Missile and Guidance, 2020, 40 (2): 89-92.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]