[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2019 , Vol. 39 >Issue 4: 65 - 68

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2019.04.016

Calculation Model of Firing Time of Anti-aircraft Missile under Radar Active Jamming

  • GAO Bo 1 ,
  • LI Yucun 1 ,
  • TANG Yuefei 2
Expand
  • 1 Naval Aviation University, Shandong Yantai 264001, China
  • 2 No. 91352 Unit, Shandong Weihai 264200, China

Received date: 2018-07-12

  Online published: 2025-05-19

Fold

Abstract

In order to assess the firing effectiveness of anti-aircraft missile under the electronic interference conditions, the paper established calculation model of firing time based on the space kill zone of anti-aircraft missile, the detection distance of air defense radar under long range support interference, and the firing time were also calculated when the air defense missile radar was disturbed the firing frequency and killing probability of anti-aircraft at different altitudes and different route shortcuts were obtained. It provides a feasible method for evaluating the firing efficiency for anti-aircraft missile under the condition of electronic interference. The simulation results show that long range support interference greatly reduces the firing efficiency of anti-aircraft missiles.

Key words： support interference; anti-aircraft missile; firing time; effectiveness evaluation

Cite this article

GAO Bo , LI Yucun , TANG Yuefei . Calculation Model of Firing Time of Anti-aircraft Missile under Radar Active Jamming[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2019 , 39(4) : 65 -68 . DOI: 10.15892/j.cnki.djzdxb.2019.04.016

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
鲁修国, 梁增友. F装药双层药型罩射流性能的数值研究[J]. 弹箭与制导学报, 2010, 30 (6): 118- 121.

[2]
夏杰, 段卫东. 双层药型罩射流形成的仿真研究[J]. 爆破, 2011, 28 (3): 13- 16.

[3]
曹杰, 王猛, 胡坤伦,等. 铜铝复合药型罩厚度比的数值模拟研究[J]. 火工品, 2017 (3): 14- 17.

[4]
崔斌, 王志军, 董方栋,等. 尼龙射流冲击夹层装药的仿真研究. 兵器材料科学与工程, 2014, 37 (6): 86- 89.

[5]
崔斌, 王志军, 董方栋,等. 尼龙-铜复合药型罩射流成形的仿真研究[J]. 兵工学报, 2014, 35 (增刊2): 18- 21.

[6]
尹建平, 王志军. 弹药学[M].2版. 北京: 北京理工大学出版社, 2012: 210- 213.

[7]
宋梅利, 李伟兵, 王晓鸣,等. 药型罩材料影响 EFP 成型的数值计算研究[J]. 火工品, 2009 (4): 16- 19.

[8]
王礼立, 朱兆祥. 应力波基础[M]. 北京: 国防工业出版社, 1985: 52- 57.

[9]
郑宇, 王晓鸣, 李文彬. 双层药型罩侵彻半无限靶板的数值仿真研究[J]. 南京理工大学学报(自然科学版), 2008, 32 (3): 313- 317.

[10]
ANSYS Inc. Autodyn user manual: Release 12.1[M].[S.l.]: ANSYS Inc., 2009: 56- 78.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]