[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2017 , Vol. 37 >Issue 5: 61 - 64,73

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2017.05.014

PROJECTILES TECHNOLOGY

Matching Design and Experimental Research on the EFP Formation with Hemispherical Liner

  • CHEN Kequan ,
  • LU Zhonghua ,
  • TANG Ping ,
  • HAN Bing ,
  • HU Rongxi
Expand
  • 1 Institute of Chemical Materials, CAEP, Sichuan Mianyang 621900, China
    2 Robust Munitions Center, CAEP, Sichuan Mianyang 621900, China
    3 Institute of Applied Physics and Computational Mathematics, Beijing 100094, China

Received date: 2016-11-16

  Online published: 2025-05-22

Fold

Abstract

Numerical models of experimental device of explosive-formed projectile with hemispherical liner are set up, the characteristic of explosive-formed projectile and the process of its penetration the disconnected target are studyed by the finite element method. Liner structures are obatined by matching design between charge and structure, based on the detonation characteristics of RDX-PBX and HMX-PBX explosive. At the same time, several static experiments of explosive-formed projectile penetration disconnected target are carried out. The results show that the rationality of the method of matching design is demonstrated, the results of EFP formation with hemispherical liner charge structure optimization design has certain application value.

Key words： explosive-formed projectile; penetration; numerical simulation; experimental research

Cite this article

CHEN Kequan , LU Zhonghua , TANG Ping , HAN Bing , HU Rongxi . Matching Design and Experimental Research on the EFP Formation with Hemispherical Liner[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2017 , 37(5) : 61 -64,73 . DOI: 10.15892/j.cnki.djzdxb.2017.05.014

[an error occurred while processing this directive]

References

[1]
梁争峰, 胡焕性. 爆炸成形弹丸技术现状与发展[J]. 火炸药学报, 2004, 27(4): 21-25.
[2]
苟瑞君, 刘天生, 王凤英. 爆炸成型弹丸药型罩研究[J]. 爆炸与冲击, 2003, 23(3): 259-261.
[3]
赵慧英, 沈兆武, 李成兵, 等. 带尾翼爆炸成型弹丸的新技术[J]. 含能材料, 2006, 14(2): 102-104.
[4]
段建, 周刚, 王可慧, 等. 结构参数对爆炸成型弹丸性能影响的研究[J]. 弹箭与制导学报, 2010, 30 (6): 103-107.
[5]
李传增, 王树山, 荣竹. 爆炸成型弹丸对装甲靶板的高速冲击效应研究[J]. 振动与冲击, 2011, 30 (4): 91-94.
[6]
林加剑, 贾虎. 爆炸成型弹丸有效装药结构理论分析及试验研究[J]. 弹箭与制导学报, 2015, 35(1): 59-62.
[7]
王猛, 黄德武, 罗荣梅. 整体多枚爆炸成型弹丸战斗部试验研究及数值模拟[J]. 兵工学报, 2010, 31 (4): 453-457.
[8]
姚志华, 王志军, 王辉, 等. 锥角和壁厚对多爆炸成型弹丸成型影响的数值模拟[J]. 弹箭与制导学报, 2011, 31(4): 85-88.
[9]
王树有, 门建兵, 蒋建伟. 包覆式爆炸成型复合侵彻体成型规律研究[J]. 高压物理学报, 2013, 27 (1): 40-44.
[10]
常江, 吴功平, 范宇, 等. 复合战斗部爆炸成型弹丸结构参数影响分析[J]. 国防科技大学学报, 2015, 37 (3): 155-160.
[11]
谭凯元, 韩勇, 罗观, 等. HMX 基 PBX 的作功能力及其 JWL 状态方程[J]. 火炸药学报, 2013, 36 (3): 42-45.
[12]
张林, 张祖根, 秦晓云, 等. D6A、921 和 45 钢的动态破坏与低压冲击特性[J]. 高压物理学报, 2003, 17 (4): 305-310.
[13]
杨柳, 罗迎社, 许建民, 等. 20 号钢热拉伸流变特性的研究: I[J]. 湘潭大学自然科学学报, 2004, 26 (2): 37-40.
[14]
赵慧英, 沈兆武. 爆炸成型弹丸速度计算方法[J]. 中国工程科学, 2007, 9(8): 62-65.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]