Journal of Projectiles, Rockets, Missiles and Guidance >
Fast Positioning Technology of Loading Device of Wind Tunnel Strain-gauge Balance Calibration System
Received date: 2012-03-23
Online published: 2025-05-26
The principle of strain balance body shafting calibration system loads based on the CG-01 wind tunnel collimator micrometer head positioning was described, the shafting calibration system loading head fast positioning design, precision indicators debugging steps were introduced. The methods for initial positioning and fast positioning method for precise space positioning were proposed and the two were analyzed and compared. The fast positioning method has been used for calibration of balances, and good results were achieved.
Key words： space coordinate; micro-alignment; loading device positioning
YU Weiqing , YUAN Xianshi , LI Tong , CHEN Zhijian , GAO Chao . Fast Positioning Technology of Loading Device of Wind Tunnel Strain-gauge Balance Calibration System[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2013 , 33(2) : 92 -94 . DOI: 10.15892/j.cnki.djzdxb.2013.02.020
| [1] | 贺德馨. 风洞天平[M]. 北京: 国防工业出版社, 2001. |
| [2] | 王继虎. 六自由度天平校准系统瞄准定位系统设计报告[R]. 北京: 北京长城计量测试技术研究所, 2006. |
| [3] | 赵长辉. 天平校准系统设计报告[R]. 沈阳: 中国航空工业空气动力研究院, 2006. |
| [4] | 蒋有年. 测微准直望远镜与零距直角头组合后同轴度误差的测定和消除. 航空制造技术, 1983 (5): 5- 7. |
| [5] | 张尧禹, 张明慧, 乔彥峰. 一种高精度非接触位置测量系统. 光学精密工程, 2002,10 (1): 41– 44. |
| [6] | 付芸, 张峋, 武克用. 非接触交会测量法在空间位置测量中应用. 光电工程, 2005,32 (9): 39- 42. |
/
| 〈 |
|
〉 |