CORRELATION TECHNOLOGY

An Optimal Method of Selecting Test Point Based on Rule of Maximum Fault Diagnosis Information Value

  • ZHOU Yuliang ,
  • HE Guangjun ,
  • WU Jianfeng ,
  • CUI Sanjun
Expand
  • The Missile Institute, Air Force Engineering University, Shaanxi Sanyuan 713800, China

Received date: 2009-12-14

  Online published: 2025-05-28

Abstract

The problem of selecting test points of a missile attitude stabilization subsystem is researched.At first,using the concept of entropy in the information theory,an algorithm of the maximal fault diagnosis information value,considering reliability and testing cost,is presented based on the pertinence model.Then,test points can be selected based on the information value,a more efficient fault diagnosis strategy can be constituted,and a fault isolation tree is drawn.The application example shows that the method is correct and feasible,the strategy needs fewer testing costs.

Cite this article

ZHOU Yuliang , HE Guangjun , WU Jianfeng , CUI Sanjun . An Optimal Method of Selecting Test Point Based on Rule of Maximum Fault Diagnosis Information Value[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010 , 30(5) : 230 -232 . DOI: 10.15892/j.cnki.djzdxb.2010.05.050

References

[1]
Huang JL, Cheng KT. Test point selection for analog fault diagnosis of unpowered circuit boards[J]. IEEE Transaction on Circuits and systems II: Analog and Digital Signal Processing, 2000. 47 (10): 977- 987.
[2]
蔡金燕, 陈国通, 张宏伟. 故障诊断中的测试节点优选方法[J]. 军械工程学院学报, 2003, 14 (1): 7- 10.
[3]
王建宏, 许化龙, 曹祥宇. 导弹姿态控制系统最佳测试点的选取[J]. 上海航天, 2003 (1): 50- 52.
[4]
田仲, 石君友. 系统测试性设计分析与验证[M]. 北京: 北京航空航天大学出版社, 2003. 177- 186.
[5]
胡昌华, 许化龙. 控制系统故障诊断与容错控制的分析和设计[M]. 北京: 国防工业出版社, 2008: 147- 157.
[6]
Manetti S, Piccirilli MC, Liberatore A. Automatic test point selection for linear analog network fault diagnosis[C]// IEEE, International Symposium on Circuits and Systems, 1990. 25- 28.
Outlines

/

tom_en.htm"-->