Journal of Projectiles, Rockets, Missiles and Guidance >
The Research on Integrated Modeling and Joint Simulation of Hydraulic Control Actuator
Received date: 2010-09-13
Online published: 2025-05-30
A method of integrated modeling and joint simulation for hydraulic control actuator under different environment was ad-vanced in the paper. The mechanical system and hydraulic transmission system were built within ADAMS and the simulating model for the control system of the hydraulic control actuator was built in MATLAB/Simulink. With the integration of the mechanical completed, hydraulic and control systems, the joint simulation with this technology was achieved. The research result indicates: the correct simulation model of hydraulic control actuator can be achieved by this method; the simulation result is more reliable which is helpful to validation of hydraulic control actuator performance and improvement of the design.
TANG Kai , LIAO Ying , HE Xingxing , FENG Xiangjun . The Research on Integrated Modeling and Joint Simulation of Hydraulic Control Actuator[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2011 , 31(3) : 207 -210 . DOI: 10.15892/j.cnki.djzdkb.2011.03.062
| [1] | 胡良谋, 李景超, 曹克强. 基于 MATLAB/SIMULINK 的电液伺服控制系统的建模与仿真研究[J]. 机床与液压, 2003(3): 230-231. |
| [2] | 霍学亮, 任光, 张均东, 等. 基于Simulink的船舶舵机系统的建模与动态仿真[J]. 大连海事大学学报, 2007, 33(增): 74-76. |
| [3] | 王国强, 张进平, 马若丁. 虚拟样机技术及其在 ADAMS 上的实践[M]. 西安: 西北工业大学出版社, 2002. |
| [4] | 杜中华, 王兴贵, 狄长春. 用Pro/E和ADAMS 联合建立复杂机械系统的仿真模型[J]. 机械, 2002, 29(增): 153-154. |
| [5] | 郑建荣. ADAMS-虚拟样机技术入门与提高[M]. 北京: 机械工业出版社, 2002. |
| [6] | 李军, 邢俊文, 覃文洁. ADAMS实例教程[M]. 北京: 北京理工大学出版社, 2002. |
/
| 〈 |
|
〉 |