MISSILES AND GUIDANCE TECHNOLOGY

Launching Load Study of Submarine Missile Based on One-way Fluid-solid Coupling

  • ZHANG Jian ,
  • YANG Ming
Expand
  • 1 China Airborne Missile Academy, Henan Luoyang 471000, China
    2 Sichuan Academy of Aerospace Technology, Chengdu 610100, China

Received date: 2015-12-07

  Online published: 2025-05-30

Abstract

For the study of load characteristics of submarine launched missile, the mathematical model of missile launching dynamics was established based on one-way fluid-solid coupling technique, and the cross section bending load under the condition of two kinds of ship speed was analyzed. The comparison of the simulation results and the test results showed that the simulation results were reliable. The calculation results showed that the missile loading dangerous cross section concentrated in the middle of the body after the position, and the boat speed had important effect on missile loading and initial deflection angle. In this paper, the modeling method and the results of the calculation had guiding significance for the overall structure design of the submarine launched missle.

Cite this article

ZHANG Jian , YANG Ming . Launching Load Study of Submarine Missile Based on One-way Fluid-solid Coupling[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2016 , 36(6) : 23 -26,35 . DOI: 10.15892/j.cnki.djzdxb.2016.06.007

References

[1]
马庆鹏 潜射航行体出筒过程载荷特性的数值模拟研究[D]. 哈尔滨: 哈尔滨工业大学, 2011.
[2]
刘兵 水下垂直发射的载荷研究[D]. 北京: 北京理工大学, 2012.
[3]
岳戈 ADINA 流体与流固耦合功能的高级应用[M]. 北京: 人民交通大学出版社, 2010: 78- 96.
[4]
苗瑞生, 居贤铭, 吴甲生 导弹空气动力学[M]. 北京: 国防工业出版社, 2006: 117- 424.
[5]
刘宝镛 全尺寸模型弹水下发射试验的有关问题[J]. 导弹与航天运载技术, 2000 (4): 1- 4.
[6]
黄寿康 流体动力·弹道·载荷·环境[M]. 北京: 中国宇航出版社, 1991: 21- 38.
[7]
庄茁, 由小川, 廖剑晖, 等 基于 ABAQUS 的有限元分析和应用[M]. 北京: 清华大学出版社, 2009: 9- 12.
[8]
阎超 计算流体力学方法及其应用[M]. 北京: 北京航空航天大学出版社, 2006: 228- 239.
[9]
温正 FLUNT 流体计算应用教程[M]. 2版. 北京: 清华大学出版社, 2013: 108- 116.
Outlines

/