Journal of Projectiles, Rockets, Missiles and Guidance >
Failure Analysis of Missile-borne Storage Device under Penetration
Received date: 2013-12-06
Online published: 2025-05-30
The structure of missile-borne storage device was analyzed to get the failure modes of it. Then penetration simulation of the storage device was analyzed and the tester circuit cavity was seriously deformed after shock, thus the circuit tester is prone to be squeezed or even broken. After that, the impact of the shell was simulated; the missile-borne storage equipment shell under high impact damage is mainly due to storage equipment shell's spallation induced by plastic deformation. Finally, penetration test was carried out for this missile-borne storage device: the weak link of the missile-borne storage equipment was given in this environment. This result provides the basis for reliability analysis of missile-borne storage device.
Key words： missile-borne storage device; penetration; failure modes
QIN Li , CHEN Yuan'e , Li feng . Failure Analysis of Missile-borne Storage Device under Penetration[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2014 , 34(4) : 158 -161 . DOI: 10.15892/j.cnki.djzdxb.2014.04.037
| [1] | 宋萍, 李科杰. 硬目标侵彻武器高冲击试验和高过载传感器技术国外发展概况[J]. 测控技术, 2002, 21(增刊): 30-32. |
| [2] | 黄筑平, 杨黎明, 潘容麟. 材料的动态损伤和失效[J]. 力学进展, 1993, 25(5): 143– 156. |
| [3] | 郭扬, 李永池, 姚磊, 等. 铝锂合金材料的极限应变率软化特性研究[J]. 爆炸与冲击, 2004, 24(1): 54– 58. |
| [4] | 刘俊, 石云波, 马游春. 高过载测试中结构防护模型研究[J].测试技术学报, 2005, 19(3): 249-253. |
| [5] | 景鹏. 高g值冲击测试关键技术研究[D].山西: 中北大学, 2009. |
| [6] | 任鸿秋. 存储测试系统的可靠性分析[J]. 火力与指挥控制, 2008, 33(4): 146-148. |
/
| 〈 |
|
〉 |