CORRELATION TECHNOLOGY

Anti-impact Design for Storage Test Module

  • MENG Lingjun ,
  • ZHAO Panpan
Expand
  • 1 Key Laboratory of Instrumentation Science & Dynamic Measurement(North University of China), Ministry of Education, Taiyuan 030051, China
    2 National Key Laboratory of Electronic Measurement Techndogy, North University of China, Taiyuan 030051, China

Received date: 2015-01-28

  Online published: 2025-05-30

Abstract

Based on analysis on penetration failure mechanism and buffering protection principles of storage test module under high-overload and dynamic simulation on impact, the maximum stress which circuit board suffered from and its attenuation were analyzed, accurate data and some conclusions about structure miniaturization were got.According to Newton's second theorem, the wave equation of the module was established and the stress wave propagation in variable sections was acquired.Compared with traditional structures by means of shell-ing, the maximum acceleration of the proposed is about 40 000 g while that of the traditional is about 60 000 g, from those experimental re-sults, it can be concluded that the proposed structure in this paper has higher cushioning properties and impact resistance.

Cite this article

MENG Lingjun , ZHAO Panpan . Anti-impact Design for Storage Test Module[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2016 , 36(1) : 140 -142 . DOI: 10.15892/j.cnki.djzdxb.2016.01.035

References

[1]
姬永强, 李映辉, 聂飞. 弹载数据存储模块抗高过载防护技术研究[J]. 振动与冲击, 2012, 31(18):104-106.
[2]
刘俊, 石云波, 游春. 高过载测试中结构防护模型研究[J]. 测试技术学报, 2005, 19(3):249-253.
[3]
刘晓鹏, 石云波, 朱政强. 应力波在弹体侵彻靶板中的传播特性研究[J]. 仪器仪表学报, 2008, 29(8):557-559.
[4]
徐鹏, 范锦彪, 祖静, 等. 高g值冲击下存储测试电路模块缓冲保护研究[J]. 实验力学, 2005, 20(4):610-614.
[5]
吴晓莉, 张河. 高冲击下电子线路灌封材料的缓冲机理及措施研究[J]. 包装工程, 2004, 25(1):44-46.
[6]
姚磊, 李永池. 应力波在变截面体中的传播特性[J]. 爆炸与冲击, 2007, 27(4):345-347.
[7]
鲍爱达, 陈员娥, 李长龙, 等. 弹载加速度记录仪在冲击环境下的失效研究[J]. 振动与冲击, 2012, 32(13):82-85.
Outlines

/