Journal of Projectiles, Rockets, Missiles and Guidance >
Optimization of Spray Injection Mode for Cantilever Slope Sprayer of Military Super-aircraft
Received date: 2017-01-06
Online published: 2025-05-22
In this paper, numerical simulation is used to study the effect of injection mode on the flow characteristics of the flow field, which is divided into two parts: injection angle and injection hole shape. Combining with the parameters of fuel blending efficiency, penetration depth and total pressure loss, the effects of different injection modes on the flow field characteristics of the flammable combustion chamber were investigated. The conclusions are as follows: The jetting angle increases with the increase of jet penetration depth, but the blending efficiency decreases and the total pressure loss increases. Comparing with the other three types, the injection angle y = 5° Angle is more ideal; diamond hole in fuel blending, expansion to the expansion and the total pressure loss has obvious advantages, with better flow characteristics.
Key words： super combustion combustor; cantilever slope; injection method; ethylene
WANG Zheng , ZHANG Han , LONG Zhenguo , WANG Jianjun . Optimization of Spray Injection Mode for Cantilever Slope Sprayer of Military Super-aircraft[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2017 , 37(5) : 81 -86 . DOI: 10.15892/j.cnki.djzdxb.2017.05.019
| [1] | 徐旭, 陈兵, 徐大军. 冲压发动机原理及技术[M]. 北京: 北京航空航天大学出版社, 2014: 175- 200. |
| [2] | CURRAN E T, MURTHY S N B. Scramjet propulsion[M]. Reston: AIAA, 2002: 28- 44. |
| [3] | 金亮, 黄伟, 郭善广. 超燃冲压发动机旋转斜坡概念研究[J]. 推进技术, 2014, 35 (4): 530- 536. |
| [4] | SISLIAN J P, SCHUMACHER J. A comparative study of hypersonic fuel/air mixing enhancement by ramp and cantilevered ramp injectors: AIAA 99-4873[R].[ S.l.:s.n.], 1999. |
| [5] | WANG Y W, SISLIAN J P. Numerical investigation of methane and air mixing in a shcramjet inlet: AIAA 2008- 2533[R]. Reston: AIAA, 2008. |
| [6] | SISLIAN J P, PARENT B. Hypervelocity fuel/air mixing in a shcramjet inlet[J]. Journal of Propul and Power, 2004, 20(2): 263-272. |
| [7] | PARENT B, SISLIAN J P. Effect of geometrical parameters on the mixing performance of cantilevered ramp injectors[J]. AIAA Journal, 2003, 41(3): 448-456. |
| [8] | WANG Y W, SISLIAN J P. Numerical investigation of methaneand air mixing in a shcramjet inlet: AIAA 2008- 2533[R].[S.l.]: AIAA, 2008. |
| [9] | HUANG Wei, LI Shi-bin, YAN Li, et al. Performance evaluation and parametric analysis on cantilevered ramp injector in supersonic flows[J]. Acta Astronautica, 2013, 84: 141-152. |
| [10] | 杨银军, 窦志国, 段立伟. 超声速来流中横向喷流角度对流动与混合特性的影响[J]. 现代电子技术, 2013, 36(17): 151-154. |
| [11] | OGAWA H, BOYEE R R. Computational investigation of fuel injection with various injector geometries and mixing into hypersonic cross flow in scramjet engines Grapevine, Texas: AIAA 2013-0115[R].[S.l.]: AIAA, 2013. |
| [12] | POHLMAN M R. GREEND KE R B. Critical design parameters for pylon-aided gaseous fuel injection: AIAA 2009-1422[R].[S.l.] AIAA, 2009. |
| [13] | 闫明磊, 韦宝禧, 徐旭, 等. 应用气动斜坡和燃气发生器的超燃烧室[J]. 北京航空航天大学学报, 2011, 37(7): 782-788. |
| [14] | SEGAL Corin. The scramjet engine: processes and characteristics[M]. Cambridge: Cambridge University Press, 2009: 85-86. |
| [15] | WEI Baoxi, ZHANG yan, TIAN Liang, et al. Experimental study on combustion mode transition in an aero-ramp based scramjet: Atlanta. Georgia: AIAA 2012-3923[R]. Reston: AIAA, 2012. |
| [16] | MONTES D R, KING P I. GRUBER M R, et al. Mixing effects of pylon-aided fuel injection located upstream of flame holding cavity in supersonic flow: AIAA 2005-3913[R]. Reston: AIAAA，2005. |
/
| 〈 |
|
〉 |